
Maren ProPAK 2R350 Ram Baler
FEATURES
- Large “Wide Box” (57” W x 80” L), clear opening with standard tongue and groove floor, ideal for both post-Industrial cardboard and scrap metals, while easily processing paper, fiber, plastic and other recyclables.
- Interlocking plate steel construction distributes stresses away from welds to tabbed locking joints. : Chassis floor and sides constructed of seamless single sheet plate steel.
- Replaceable “AR” hardened wear liners allow for limitless replacement of all chassis wear surfaces for years of reliable service.
- Multi edge replaceable shear blades reduce cost by allowing blade rotation to gain additional new cutting edges before blade replacement. Extended progressive cutting profile shears material over a long distance effectively reducing shear jams.
- 600-800 gallon floor mounted hydraulic oil reservoir shipped full of oil.
- Clogged oil filter sensor, high oil temp sensor and low oil level sensors automatically protect your investment while notifying the operator attention is needed.
- Robust ram and door position transducers allow automatic control of bale size, final bale finishing, shear jam prevention, wire placement and bale ejection.
- Bale separation door facilitates instant material changes and virtually eliminates cross contamination between bales. The door’s transducer positioning allows up to 13” oversized bales to eject without jam, yet closely guides the bale to the tier for tight bales and reduced falloff.
- All safety E-Stops and contactor resets monitored by a dual redundant safety relay system.
INDUSTRIES
- POST CONSUMER RECYCLING
- DISTRIBUTION & WAREHOUSING
- SCRAP METAL
- MANUFACTURING BYPRODUCT
MATERIALS
- OCC
- MIXED PAPER
- MAGAZINES
- ALUMINUM CANS
- ALUMINUM EXTRUSIONS
- ALUMINUM SIDING/SHEET
- TIN CANS
- NON INSULATED COPPER WIRE
- #1 COPPER
- MSW
- HDPE
- PET
PERFORMANCE DATA
Motor: Dual 40hp, Dual 50hp or triple 40hp TEFC 3 Phase motors generate 80, 100 or 120 hp. Motors automatically stage start to reduce surge on electric service. During low production demand motors can be de-selected to reduce overall electrical consumption and throughput while maintaining 100% bale weights and shearing performance.
Hydraulic: A simple but innovative hydraulic system allows the 2R330 to run faster and more efficiently while being more serviceable. highly efficient piston pumps rated for 6,100 psi run at only 4,200 psi ensuring less stress and long life. All pumps are mounted below tank level to eliminate start up cavitation and extend pump life.
Hydraulic System: High Efficiency Regenerative.
Platen Force: 330,000 lbs.
Platen Pressure: 193 psi.
Dry Cycle Time at full penetration: 13 seconds (120hp) – 18 seconds (80hp)
BALEWEIGHTS (TONS/HR.)*
BALE SIZE: Length: 60″ Width: 38″–51″ (*OS) Height: 30″
* Bale Weights are approximate, and may differ with moisture content, material density, etc.
* Due to Maren’s commitment to product quality and refinement, these specifications are subject to change without notice, and without incurring responsibility to units previously sold.
OCC | 1,700 lbs. |
MIXED PAPER | 1,700 lbs. |
MAGAZINES | 2,000 lbs. |
ALUMINUM CANS | 1,100 lbs. |
ALUMINUM EXTRUSIONS | 1,400 lbs. |
ALUMINUM SIDING/SHEET | 2,000 lbs. |
TIN CANS | 1,250 lbs. |
NON INSULATED COPPER WIRE | 1,500 lbs. |
#1 COPPER | 1,600 lbs. |
MSW | 2,400 lbs. |
HDPE | 1,500 lbs. |
PET | 1,300 lbs. |
(percentage of caps on bottles will vary bale weights)
MAREN ProPAK 2R265 TWO RAM BALER
FEATURES
- Large “Wide Box” (57” W x 64” or 80” L), clear opening with standard tongue and groove floor, ideal for both post-Industrial cardboard and scrap metals, while easily processing paper, fiber, plastic and other recyclables.
- Interlocking plate steel construction distributes stresses away from welds to tabbed locking joints.
- Chassis floor and sides constructed of seamless single sheet plate steel.
- Replaceable “AR” hardened wear liners allow for limitless replacement of all chassis wear surfaces for years of reliable service.
- Multi edge replaceable shear blades reduce cost by allowing blade rotation to gain additional new cutting edges before blade replacement. Extended progressive cutting profile shears material over a long distance effectively reducing shear jams.
- 400-600 gallon floor mounted hydraulic oil reservoir shipped full of oil.
- Clogged oil filter sensor, high oil temp sensor and low oil level sensors automatically protect your investment while notifying the operator attention is needed.
- Robust ram and door position transducers allow automatic control of bale size, final bale finishing, shear jam prevention, wire placement and bale ejection.
- Bale separation door facilitates instant material changes and virtually eliminates cross contamination between bales. The door’s transducer positioning allows up to 13” oversized bales to eject without jam, yet closely guides the bale to the tier for tight bales and reduced fall-off.
- All safety E-Stops and contactor resets monitored by a dual redundant safety relay system.
INDUSTRIES
DISTRIBUTION & WAREHOUSING
MANUFACTURING BYPRODUCT
PERFORMANCE DATA
Motor: Dual 20 hp, 20 hp or 40 hp TEFC 3 Phase motors generate 40, 60 or 80 hp. Motors automatically stage start to reduce surge on electric service. During low production demand motors can be de-selected to reduce overall electrical consumption and throughput while maintaining 100% bale weights and shearing performance.
Hydraulic: A simple but innovative hydraulic system allows the 2R265 to run faster and more efficiently while being more serviceable. highly efficient piston pumps rated for 5,100-6,100 psi run at only 4,200 psi ensuring less stress and long life. All pumps are mounted below tank level to eliminate start-up cavitation and extend pump life.
Hydraulic System: High Efficiency Regenerative.
Platen Force: 267,000 lbs.
Platen Pressure: 156 psi. Dry Cycle Time at full penetration : – 14 seconds (80hp & 64”L hopper) – 25 seconds (40hp, 80”L hopper)
BALEWEIGHTS (TONS/HR.)*
OCC | 1,600 lbs. |
MIXED PAPER | 1,600 lbs. |
MAGAZINES | 1,900 lbs. |
ALUMINUM CANS | 1,000 lbs. |
ALUMINUM EXTRUSIONS | 1,300 lbs. |
ALUMINUM SIDING/SHEET | 1,900 lbs. |
TIN CANS | 2,100 lbs. |
NON-INSULATED COPPER WIRE | 5,900 lbs. |
#1 COPPER | 3,900 lbs. |
MSW | 2,300 lbs. |
HDPE | 1,300 lbs. |
PET | 1,200 lbs. |
(percentage of caps on bottles will vary bale weights) |
* Bale Weights are approximate, and may differ with moisture content, material density, etc.
* Due to Maren’s commitment to product quality and refinement, these specifications are subject to change without notice, and without incurring responsibility to units previously sold.
MAREN ProPAK 2R210 TWO RAM BALER
FEATURES
- Large “Wide Box” (57” W x 64” L), clear opening with standard tongue and groove floor, ideal for both
post-Industrial cardboard and scrap metals, while easily processing paper, fiber, plastic and other
recyclables - Interlocking plate steel construction distributes stresses away from welds to tabbed locking joints.
- Chassis floor and sides constructed of seamless single sheet plate steel.
- Replaceable “AR” hardened wear liners allow for limitless replacement of all chassis wear surfaces
for years of reliable service. - Multi edge replaceable shear blades reduce cost by allowing blade rotation to gain additional new
cutting edges before blade replacement. Extended progressive cutting profile shears material over
a long distance effectively reducing shear jams. - 400 gallon floor mounted hydraulic oil reservoir shipped full of oil.
- Clogged oil filter sensor, high oil temp sensor and low oil level sensors automatically protect your
investment while notifying the operator attention is needed. - Robust ram and door position transducers allow automatic control of bale size, final bale finishing,
shear jam prevention, wire placement and bale ejection. - Bale separation door facilitates instant material changes and virtually eliminates cross contamination
between bales. The door’s transducer positioning allows up to 13” oversized bales to eject without
jam, yet closely guides the bale to the tier for tight bales and reduced fall-off. - All safety E-Stops and contactor resets monitored by a dual redundant safety relay system.
INDUSTRIES
- DISTRIBUTION & WAREHOUSING
- MANUFACTURING BYPRODUCT
PERFORMANCE DATA
Motor: Dual 20 hp or 30 hp TEFC 3 Phase motors generate 40, 60 hp. Motors automatically stage start to reduce surge on electric service. During low production demand motors can be de-selected to reduce overall electrical consumption and through-put while maintaining 100% bale weights and shearing performance.
Hydraulic: A simple but innovative hydraulic system allows the 2R210 to run faster and more efficiently while being more serviceable. highly efficient piston pumps rated for 5,100 psi run at only 4,200 psi ensuring less stress and long life. All pumps are mounted below tank level to eliminate start-up cavitation and extend pump life.
Hydraulic System: High Efficiency Regenerative.
Platen Force: 211,000 lbs.
Platen Pressure: 123 psi.
Dry Cycle Time at full penetration: 17 seconds
BALEWEIGHTS (TONS/HR.)*
OCC | 1,500 lbs. |
MIXED PAPER | 1,600 lbs. |
MAGAZINES | 1,800 lbs. |
ALUMINUM CANS | 850 lbs. |
ALUMINUM EXTRUSIONS | 1,200 lbs. |
ALUMINUM SIDING/SHEET | 1,800 lbs. |
TIN CANS | 2,000 lbs. |
NON INSULATED COPPER WIRE | 5,800 lbs. |
#1 Copper | 3,800 lbs. |
MSW | 2,200 lbs. |
HDPE | 1,200 lbs. |
PET | 1,100 lbs. |
(percentage of caps on bottles will vary bale weights) |
* Bale Weights are approximate, and may differ with moisture content, material density, etc.
* Due to Maren’s commitment to product quality and refinment, these specifications are subject to change without notice, and without incurring responsibility to units previously sold.
MAREN ProPAK 2R185 TWO RAM BALER
The Model ProPAK 2R185 is a fully automatic 2 RAM baler. The extra large feeder hopper can be adapted to gravity, pneumatic or belt conveyor automatic feed devices. After each bale is made, the chamber completely clears—so go ahead, switch materials on the fly—without making unwanted contaminated bales. A built-in shear eliminates the unnecessary extra step of “pre-conditioning” difficult materials. Using either Accent 470 or L.P. Pinnacle II wire-tie systems, the bale gets tied underneath and the short way: saving wire, increasing bale density and holding bales together better during transportation. This adds up to time and money savings!
PERFORMANCE DATA
Motor: 20hp ; (30hp Optional) TEFC Motor 460 Volt 3 Phase. Efficiency of hydraulic system allows for higher production rates with lower horsepower required
Hydraulic: 48 GPM 4400 psi rated, horsepower limited pressure compensated piston hydraulic pump w/ high pressure unloading valve, mounted below tank level to eliminate start up cavitation and extend pump life
Hydraulic System: Regenerative, 4,100 psi hydraulic pressure, 4500 psi max system pressure
Platen Force: 180,562 lbs.
Platen Pressure: 109 psi.
Cycle Time: SHORT : 24 seconds; FULL : 29 seconds
BALEWEIGHTS (TONS/HR.)*
OCC | 1,500 lbs. | SHORT STROKE – 1,600 lbs. : FULL STROKE (4.4) |
MAGAZINES | 2,000 lbs. | (9) |
NEWSPAPER | 1,500 lbs. | (8) |
OFFICE PAPER | 1,600 lbs. | (8) |
ALUMINUM CANS | 700 lbs. | (2.9) |
TIN CANS | 1,250 lbs. | (5.5) |
HDPE | 1,125 lbs. | (3.4) |
PET | 1,000 lbs. | (2.5) (percentage of caps on bottles will vary bale weights) |
* Bale weights are approximate and may differ with moisture content, material density, etc.
Maren ProPAK 2R175 Two Ram Baler
INDUSTRIES
- DISTRIBUTION & WAREHOUSING
- MANUFACTURING BYPRODUCT