HWI sells new and used material processing equipment such as Maren balers and shredders,
PTR vertical balers, and compactors. We review your operation to determine
your exact equipment needs and specific size requirements.

HWI Equipment is your complete, professional source of quality recycling equipment, specializing in Maren balers (auto-tie and manual-tie) and shredders, PTR vertical balers and compactors. From consultation, equipment selection, logistics, installation and maintenance, we have you covered. You have enough to worry about…let HWI provide a helping hand in coordinating your next project from concept to start-up. You’ll be glad you chose a partner with the dedication and experience of HWI Equipment!

Filter By:

RESET ALL
  • PT-100LD thru PT350LD Self Contained Compactor

    , New

    The PT-350 Compactor has been engineered and manufactured to provide many years of reliable service. The heavy-duty structural steel components are welded by AWS certified technicians and water tested to ensure leak proof containment under high compaction forces. This unit has total U.L. approval, standard 3 button controls, On/Off key switch, mushroom stop, auto reverse and a Sure-Tite ™ door seal.

    Specifications

    Charge Box Capacity
    3.5 Cu-YD [2.7 Cu-m]
    Clear Top Opening
    (L X W) 41″ X 60″ [104 cm x 152 cm]
    Capacity Per Hour
    116 cy/hr

    Performance Characteristics

    Average Cycle Time
    31 sec
    Total normal Force
    42,708 lbs [189,974 N]
    Total Maximum Force
    49,115 lbs [218,474 N]
    Normal Ram Pressure
    36 psi [248 Kpa]
    Maximum Ram Pressure
    41 psi [283 Kpa]

    Electrical Equipment

    Electric
    208 / 230 / 460 – 3 Phase
    Control Voltage
    110 – 120 Vac

    Hydraulic Equipment

    Pump
    10.50 GPM [39.7 L/m]
    Normal Pressure
    2,000 psi [13,790 KPa]
    Maximum Pressure
    2,300 psi [15,858 KPa]
    (2) Cylinder Bore
    4″ [10.2 cm]
    Cylinder Rod
    2 1/2″ [6.3 cm]

     

     

    Learn More
  • PT-100 thru PT350 Self Contained Compactor

    , New

    The PT-100-350 Compactors have been engineered and manufactured to provide many years of reliable service. The heavy-duty structural steel components are welded by AWS certified technicians and water tested to ensure leak proof containment under high compaction forces. This unit has total U.L. approval, standard 3 button controls, On/Off key switch, mushroom stop, auto reverse and a Sure-Tite ™ door seal.

    Specifications

    Charge Box Capacity
    3.5 Cu-YD [2.7 Cu-m]
    Clear Top Opening
    (L X W) 41″ X 60″ [104 cm x 152 cm]
    Capacity Per Hour
    116 cy/hr

    Performance Characteristics

    Average Cycle Time
    31 sec
    Total normal Force
    42,708 lbs [189,974 N]
    Total Maximum Force
    49,115 lbs [218,474 N]
    Normal Ram Pressure
    23 psi [158 Kpa]
    Maximum Ram Pressure
    27 psi [186 Kpa]

    Electrical Equipment

    Electric
    208 / 230 / 460 – 3 Phase
    Control Voltage
    110 – 120 Vac

    Hydraulic Equipment

    Pump
    10.50 GPM [39.7 L/m]
    Normal Pressure
    2,000 psi [13,790 KPa]
    Maximum Pressure
    2,300 psi [15,858 KPa]
    (2) Cylinder Bore
    4″ [10.2 cm]
    Cylinder Rod
    2 1/2″ [6.3 cm]

    Learn More
  • TP-4000HD Stationary Compactor

    , New

    Designed For: * Retailers * Hospitals * Hotels * Distribution Centers * Manufacturing Centers * Recycling Centers * Home Centers *

    When the TP-4000 Series was designed, we challenged our engineers to see how long the machines could hold up in the field. We are pleased to say those machines originally built in the early 70’s are still performing. All components are built using heavy-duty structural steel components and welded by AWS certified technicians. This unit has total U.L. approval, standard 3 button controls (On/Off key switch, mushroom stop, auto reverse) and a 13’ Sealtite.

    Specifications

    Charge Box Capacity
    4 Cu-YD [3.0 Cu-m]
    Clear Top Opening
    (L X W) 58″ X 68″ [147 cm x 173 cm]
    Capacity Per Hour
    87 cy/hr

    Performance Characteristics

    Average Cycle Time
    64 sec
    Total normal Force
    56,500 lbs [251,325 N]
    Total Maximum Force
    65,031 lbs [289,272 N]
    Normal Ram Pressure
    28 psi [193 Kpa]
    Maximum Ram Pressure
    32 psi [221 Kpa]

    Electrical Equipment

    Electric
    208 / 230 / 460 – 3 Phase
    Control Voltage
    110 – 120 Vac

    Hydraulic Equipment

    Pump
    15.0 GPM [56.8 L/m]
    Normal Pressure
    2,000 psi [13,790 KPa]
    Maximum Pressure
    2,300 psi [15,858 KPa]
    Cylinder Bore
    6″ [15.24 cm]
    Cylinder Rod
    4″ [10.2 cm]
    Weight
    8,950 Lbs [4,060 Kg]

    Learn More
  • TP-3000SP Stationary Compactor

    , New

    Designed For: * Retailers * Hospitals * Hotels *Distribution Centers * Manufacturing Centers * Recycling Centers * Home Centers *

    Our TP-3000SP (Short Profile) compactor was our response to customers battling space constrictions and those who could not accommodate a long chute. We managed to construct a twin cylinder machine with high compaction forces and an overall length of 145 inches. All components are built using heavy-duty structural steel components and welded by AWS certified technicians. This unit has total U.L. approval, standard 3 button controls (On/Off key switch, mushroom stop, auto reverse) and a 13’ Sealtite.

    Specifications

    Charge Box Capacity
    3.0 Cu-YD [2.3 Cu-m]
    Clear Top Opening
    (L X W) 68″ X 60″ [173 cm x 152 cm]
    Capacity Per Hour
    60 cy/hr

    Performance Characteristics

    Average Cycle Time
    60 sec
    Total normal Force
    64,000 lbs [284,686 N]
    Total Maximum Force
    76,000 lbs [338,065 N]
    Normal Ram Pressure
    35.7 psi [246 Kpa]
    Maximum Ram Pressure
    42.4 psi [292, Kpa]

    Electrical Equipment

    Electric
    208 / 230 / 460 – 3 Phase
    Control Voltage
    110 – 120 Vac

    Hydraulic Equipment

    Pump
    15.0 GPM [56.8 L/m]
    Normal Pressure
    1,800 psi [12,410 KPa]
    Maximum Pressure
    2,100 psi [14,479 KPa]
    Cylinder Bore
    6″ [15.24 cm]
    Cylinder Rod
    3 1/2″ [8.9 cm]
    Weight
    6,800 Lbs [3,084 Kg]

    Learn More
  • TP-3000HD Stationary Compactor

    , New

    Designed For: * Retailers * Hospitals * Hotels  * Distribution Centers * Manufacturing Centers * Recycling Centers * Home Centers *

    Our TP-3000HD compactor is designed for long lasting performance and durability. All components are built using heavy-duty structural steel components and welded by AWS certified technicians. This unit has total U.L. approval, standard 3 button controls (On/Off key switch, mushroom stop, auto reverse) and a 13’ Sealtite.

    Specifications

    Charge Box Capacity
    3.22 Cu-YD [2.4 Cu-m]
    Clear Top Opening
    (L X W) 68″ X 60″ [173 cm x 152 cm]
    Capacity Per Hour
    87 cy/hr

    Performance Characteristics

    Average Cycle
    Time 41 sec
    Total normal Force
    62,204 lbs [276,697 N]
    Total Maximum Force
    70,686 lbs [314,427 N]
    Normal Ram Pressure
    35 psi [241 Kpa]
    Maximum Ram Pressure
    39 psi [269 Kpa]

    Electrical Equipment

    Electric
    208 / 230 / 460 – 3 Phase
    Control Voltage
    110 – 120 Vac

    Hydraulic Equipment

    Pump
    15.0 GPM [56.8 L/m]
    Normal Pressure
    2,200 psi [15,168 KPa]
    Maximum Pressure
    2,500 psi [17236 KPa]
    Cylinder Bore
    6″ [15.24 cm]
    Cylinder Rod
    4″ [10 cm]
    Weight
    6,850 Lbs [3,107 Kg]

    Learn More
  • TP-2500 Stationary Compactor

    , New

    Designed For: * Retailers * Hospitals * Hotels * Distribution Centers * Manufacturing Centers * Recycling Centers * Home Centers *

    Our TP-25HD00 compactor is designed for long lasting performance and durability. All components are built using heavy-duty structural steel components and welded by AWS certified technicians. This unit has total U.L. approval, standard 3 button controls (On/Off key switch, mushroom stop, auto reverse) and a 13’ Sealtite.

     

    Specifications

    Charge Box Capacity
    2.5 Cu-YD [6.4 Cu-m]
    Clear Top Opening
    (L X W) 54 1/2″ X 60″ [138 cm x 152 cm]
    Capacity Per Hour
    63 cy/hr

    Performance Characteristics

    Average Cycle Time
    57 sec
    Total normal Force
    59376 lbs 264,118 N]
    Total Maximum Force
    67,858 lbs [301,847 N]
    Normal Ram Pressure
    33 psi [228 Kpa]
    Maximum Ram Pressure
    38 psi [262 Kpa]

    Electrical Equipment

    Electric
    208 / 230 / 460 – 3 Phase
    Control Voltage
    110 – 120 Vac

    Hydraulic Equipment

    Pump
    15.0 GPM [56.8 L/m]
    Normal Pressure
    1,800 psi [12,410 KPa]
    Maximum Pressure
    2,100 psi [14,479 KPa]
    Cylinder Bore
    6″ [15.24 cm]
    Cylinder Rod
    3 1/2″ [8.9 cm]
    Weight
    5,500 Lbs [2495 Kg]

    Learn More
  • TP-2000SP Stationary Compactor

    , New

    Designed For: * Retailers * Hospitals * Hotels * Distribution Centers * Manufacturing Centers * Recycling Centers * Home Centers *

    When the TP-2000 Series was designed, we challenged our engineers to see how long the machines could hold up in the field. We are pleased to say those machines originally built in the early 70’s are still performing. All components are built using heavy-duty structural steel components and welded by AWS certified technicians. This unit has total U.L. approval, standard 3 button controls (On/Off key switch, mushroom stop, auto reverse) and a 13’ Sealtite.

    Specifications

    Charge Box Capacity
    2 Cu-YD [1.5 Cu-m]
    Clear Top Opening
    (L X W) 40″ X 60″ [102 cm x 152 cm]
    Capacity Per Hour
    55 cy/hr

    Performance Characteristics

    Average Cycle Time
    65 sec
    Total normal Force
    56,549 lbs [251,543 N]
    Total Maximum Force
    65,031 lbs [289.272 N]
    Normal Ram Pressure
    31 psi [183 Kpa]
    Maximum Ram Pressure
    36 psi [210 Kpa]

    Electrical Equipment

    Electric
    208 / 230 / 460 – 3 Phase
    Control Voltage
    110 – 120 Vac

    Hydraulic Equipment

    Pump
    10.5 GPM [39.7 L/m]
    Normal Pressure
    2,000 psi [13,790 KPa]
    Maximum Pressure
    2,300 psi [1,5858 KPa]
    Cylinder Bore
    6″ [15.24 cm]
    Cylinder Rod
    3 1/2″ [8.9 cm]
    Weight
    4,500 Lbs [2,041 Kg]

    Learn More
  • TP-2000HD Stationary Compactor

    , New

    Designed For: * Retailers * Hospitals * Hotels * * Distribution Centers * Manufacturing Centers * Recycling Centers * Home Centers *

    When the TP-2000HD Series was designed, we challenged our engineers to see how long the machines could hold up in the field. We are pleased to say those machines originally built in the early 70’s are still performing. All components are built using heavy-duty structural steel components and welded by AWS certified technicians. This unit has total U.L. approval, standard 3 button controls (On/Off key switch, mushroom stop, auto reverse) and a 13’ Sealtite.

    Specifications

    Charge Box Capacity
    2 Cu-YD [1.5 Cu-m]
    Clear Top Opening
    (L X W) 40″ X 60″ [102 cm x 152 cm]
    Capacity Per Hour
    78 cy/hr

    Performance Characteristics

    Average Cycle Time
    46 sec
    Total normal Force
    59,000 lbs [262,445 N]
    Total Maximum Force
    67,858 lbs [301,847 N]
    Normal Ram Pressure
    33 psi [228 Kpa]
    Maximum Ram Pressure
    38 psi [262 Kpa]

    Electrical Equipment

    Electric
    208 / 230 / 460 – 3 Phase
    Control Voltage
    110 – 120 Vac

    Hydraulic Equipment

    Pump
    15.0 GPM [56.8 L/m]
    Normal Pressure
    2,100 psi [14,479 KPa]
    Maximum Pressure
    2,400 psi [16,547 KPa]
    Cylinder Bore
    6″ [15.24 cm]
    Cylinder Rod
    3 1/2″ [8.9 cm]
    Weight
    5,000 Lbs [2,268 Kg]

    Learn More
  • TP-2000 Stationary Compactor

    , New

    Designed For: * Retailers * Hospitals * Hotels * Distribution Centers * Manufacturing Centers * Recycling Centers * Home Centers *

    When the TP-2000 Series was designed, we challenged our engineers to see how long the machines could hold up in the field. We are pleased to say those machines originally built in the early 70’s are still performing. All components are built using heavy-duty structural steel components and welded by AWS certified technicians. This unit has total U.L. approval, standard 3 button controls (On/Off key switch, mushroom stop, auto reverse) and a 13’ Sealtite.

    Specifications

    Charge Box Capacity
    2 Cu-YD [1.5 Cu-m]
    Clear Top Opening
    (L X W) 40″ X 60″ [102 cm x 152 cm]
    Capacity Per Hour
    55 cy/hr

    Performance Characteristics

    Average Cycle Time
    65 sec
    Total normal Force
    56,549 lbs [251,543 N]
    Total Maximum Force
    65,031 lbs [289.272 N]
    Normal Ram Pressure
    31 psi [183 Kpa]
    Maximum Ram Pressure
    36 psi [210 Kpa]

    Electrical Equipment

    Electric
    208 / 230 / 460 – 3 Phase
    Control Voltage
    110 – 120 Vac

    Hydraulic Equipment

    Pump
    10.5 GPM [39.7 L/m]
    Normal Pressure
    2,000 psi [13,790 KPa]
    Maximum Pressure
    2,300 psi [1,5858 KPa]
    Cylinder Bore
    6″ [15.24 cm]
    Cylinder Rod
    3 1/2″ [8.9 cm]
    Weight
    4,500 Lbs [2,041 Kg]

    Learn More
  • TP-750 Stationary Compactor

    , New

    Designed For * Retailers * Hospitals * Hotels * Recycling Centers * Home Centers *

    The TP-750 was specially designed for applications with space constrictions. It utilizes a .75 cubic yard compactor that attaches to either a 6 or 8 Yard Rear or Front Load container. Its 4-inch cylinder produces over 20,000 lbs of normal force. It is a powerful force for your tight space applications. All components are built using heavy-duty structural steel components and welded by AWS certified technicians. This unit has total U.L. approval, standard 3 button controls (On/Off key switch, mushroom stop, auto reverse) and a 13’ Sealtite.

    Specifications

    Charge Box Capacity
    .75 Cu-YD [.57 Cu-m]
    Clear Top Opening
    (L X W) 36″ X 37″ [91 cm x 94 cm]
    Capacity Per Hour
    97 cy/hr

    Performance Characteristics

    Average Cycle Time
    37 sec
    Total normal Force
    20,000 lbs [88,964 N]
    Total Maximum Force
    23,750 lbs [105,645 N]
    Normal Ram Pressure
    15.7 psi [108 Kpa]
    Maximum Ram Pressure
    19.6 psi [135 Kpa]

    Electrical Equipment

    Electric
    208 / 230 / 460 – 3 Phase
    Control Voltage
    110 – 120 Vac

    Hydraulic Equipment

    Pump
    6.5 GPM [25 L/m]
    Normal Pressure
    1,600 psi [725 KPa]
    Maximum Pressure
    1,900 psi [682 KPa]
    Cylinder Bore
    4″ [10.1 cm]
    Cylinder Rod
    2.5″ [6.3 cm]
    Weight
    3,500 Lbs [1,588 Kg]

     

    Learn More